PhotoPlog - Blank page and I think I've tried everything

PhotoPlog (http://www.photoplog.com/forum/index.php)

- Troubleshooting & Problems (http://www.photoplog.com/forum/forumdisplay.php?f=6)

- - Blank page and I think I've tried everything (http://www.photoplog.com/forum/showthread.php?t=2221)

phyc	03-19-2008 09:26 PM

Blank page and I think I've tried everything

1 Attachment(s)

Okay,

I've uninstalled, re-installed twice, to no avail. This is on VB 3.6.8 L2 just FYI.

Things I've done and/or tried.

*I have the path set exactly like the whatismypath.php showed (see attached screenshot).

*I've set permissions to 777 on the photoplog directory (and even went as far as doing all subdirectories and files inside too)

*I double-checked and the forum is not running in safe mode

*The photoplog is turned on.

*Usergroup permissions were checked

*Files re-uploaded in case something dropped on initial upload.

*Reversed the slashes just to see if it made a difference...it did not.

What else should I try?

Thanks for any help!!! :)

MikeD

03-19-2008 09:43 PM

Sometimes the needed answers are hidden in this forum. Do a search and you'll find the answers you need. Such like...

- Blank page on upload => See Morgan's Post #2
- Install Issue- Please Help => See Morgan's Post #2

And the most important: Blank Page or Warning: chdir() or Warning: main() - Why? Hope that helps :)

phyc	03-19-2008 10:05 PM

Yeah, well...I searched previous to this...here and vbulletin.org and I've tried everything that I found.

Morgan

03-19-2008 11:17 PM

Try the following path in the PhotoPlog config file:

Code:

/home/illpump1/www/your-domain.com/forum

phyc	03-20-2008 02:53 PM

Ok, thanks!!! I'll report back.

phyc	03-20-2008 06:40 PM

Wow! I've tried all of these with the same results:

Code:

/home/illpump1/www/oursite.com/forum



/home/illpump1/www/forum.oursite.com/



/home/illpump1/www/www.oursite.com/forum



\home\illpump1\www\forum.oursite.com



\home\illpump1\www\www.oursite.com\forum



\home\illpump1\www\oursite.com\forum

I'm baffled!

Morgan

03-21-2008 12:47 AM

How about this:

Code:

/home/illpump1/www/forum

phyc	03-24-2008 03:04 PM

Oh I could shoot myself. I was using a php editor and it was NOT overwriting like I thought it was. It was the second one of the many I tried above. It's now loading.

Thank you for the help, and my sincere apologies for my error!!! I should have double-checked that!

Off to test it out! Thanks again!!!:)

All times are GMT. The time now is 06:10 AM.